Why do short links stop working?
The short link itself almost never fails. The page it points to does. A shop retires a product page when stock runs out, a website redesign changes every address, an event page comes down once the event is over, a shared document loses its sharing setting, or nobody renews a domain. The short link keeps redirecting exactly as it was told to, straight to a page that now answers with an error.
Printed QR codes come off worst. The code on a poster, a menu or a product label stays in circulation for months, it can’t be reprinted once it has gone out, and the people who scan it and hit an error page rarely tell you. They just stop scanning.
The gradual loss of web pages over months and years, which leaves older links pointing at error pages, is usually called link rot. The Broken Link Checker on Pro and Elite lists which of your short links and QR codes lead to a page that has failed to load on three checks, so you can see which ones need a new destination.
How long after it goes out is a link still being used?
For much longer than most people plan for. We looked at 2,056,596 clicks and scans recorded on LinkShortener.io short links and QR codes between 18 July 2023 and 21 September 2026, with known bots filtered out. Of the QR code scans, 62.0% happened more than a month after the code was created and 36.1% more than three months after. Across all links, 19.2% of clicks arrived after the first month.
So most of the scans a printed code will get arrive after its launch week is long forgotten, which is exactly when nobody is watching the page behind it. The checker keeps watching for you.
What happens during a check?
- The checker requests the main destination of an active short link or QR code that points to a web address.
- It asks for the page headers first. If a site refuses that lighter request, it loads the full page instead, so a server that only mishandles header requests isn’t mistaken for a dead one.
- It follows up to 10 redirects to reach the final page and waits up to 15 seconds for a reply.
- A page that loads, with any answer from 200 to 399, puts the link’s failure count back to zero.
- A page that errors or doesn’t reply adds one failure. At three failures in a row the link is marked broken and appears on the Broken Links page.
- If a broken link’s page loads again on a later check, the link is marked resolved, with the date, without you doing anything.
The checker visits the destination directly rather than going through your short link, so its visits never show up as clicks or scans in your link reports. It introduces itself as “LinkShortener.io Link Checker”, which makes it easy to spot in the server logs of your own website, and because it doesn’t run page scripts, tag-based analytics such as Google Analytics don’t count it as a visitor.
Which answers count as a broken link?
| What the destination does | Examples | How the checker treats it |
|---|---|---|
| Loads, directly or after redirects | 200 OK; a 301 or 302 that ends on a working page | Healthy. The failure count returns to zero. |
| Answers with an error | 404 Not Found, 410 Gone, 500, 502, 503 | One failed check |
| Doesn’t answer properly | No reply within 15 seconds, a domain that no longer exists, a refused connection, more than 10 redirects | One failed check |
| Asks for a login or turns automated visits away | 401, 403, 429 | Not counted either way. The link is simply checked again next time. |
Leaving the last row out is deliberate. A members-only page or a site that blocks automated visitors can be working perfectly for the people you send there, and flagging it would only hide the links that really are broken.
Why does a link need three failed checks before it is flagged?
Every website has bad minutes: a new release going out, a server restart, a spike in traffic. Flagging a link on one failed request would fill the list with links that were fine an hour later. Asking for three failures means a link only reaches your Broken Links page after failing the first check, then again about 30 minutes later, then again about 2 hours after that. A page that breaks is usually listed the same morning rather than the next day. If you suspect a problem sooner, press Recheck on the link to queue a fresh test.
How do I fix a short link the checker has flagged?
- Open Broken Links in your dashboard menu. It shows links that are broken right now, each with its short link, current destination, the status code or error, the number of failed checks and the date it first failed. Switch the Broken filter to include resolved links as well.
- Decide where the link should go now: the page’s new address, the closest replacement page, or a holding page that explains what has changed.
- Click Edit, paste the working address into the destination and save. The short link, and any QR code made from it, stay exactly as they are.
- Saving a new destination queues a fresh check about a minute later. Press Recheck if you want one sooner.
When the page lives on your own website and you have already repaired it there, skip the edit and press Recheck. For more on changing where a link goes, see editing a short link after it has been shared.
Which links does the checker cover?
It covers the main destination of every active short link and QR code on your account whose destination is a web address starting with http or https, whether the short link uses the shared tli.sh domain or your own branded domain. A few kinds are left out because there is no outside page to test: email address and phone number links, the addresses of Link in Bio and Product in Bio pages built on LinkShortener.io, and links that have passed their expiry date.
One thing worth knowing: it is the main destination that gets tested. If a link also has per-device or per-country rules, or an address it falls back to after it expires, those extra destinations are not checked, so test those yourself when you set them up.
Which plans include the Broken Link Checker?
The checker comes with two plans. Pro costs $34/month and allows 2,000 new links or QR codes each month; Elite costs $260/month and allows 5,000. Both plans can also edit a link’s destination, so the plan that finds a dead link can re-point it too. Free and Basic don’t include the checker; compare every plan on the pricing page.
Broken Link Checker questions
Will I get an email when one of my links breaks?
Yes. The account owner is emailed when a link newly breaks, and again if a link that was fixed breaks later. Everything is also listed on the Broken Links page of your dashboard.
Do the checks count as clicks or scans in my reports?
No. The checker goes straight to the destination page instead of through your short link, so your click and scan figures only ever show real visits.
Is this the same as the malware and phishing check?
No, the two look for different problems. On every plan, Free included, a new link is screened for malware and phishing as it is made and again about 2 hours later, and our team can switch off one that breaks our terms of use. The Broken Link Checker looks for pages that no longer load, and it comes with Pro and Elite.
My page needs a login. Will it be flagged as broken?
No. A page that answers 401 or 403 (log in first, or access refused) or 429 (too many requests) isn’t counted as a failure, because it may be working fine for your visitors. It is checked again next time.
Is a new link checked straight away?
Yes. A new or edited short link or QR code is checked about a minute after you save it, so you find a typo or a dead page before you print the code or share the link. It is checked again whenever someone clicks or scans it, and every night.
Can I test a link right now?
Yes. Press Recheck on the link’s row in Broken Links and a fresh check is queued straight away. It is most useful right after you change a destination or repair the page on your own site.
Does it check QR codes as well as short links?
Yes. A LinkShortener.io QR code opens a short link, so its destination is checked in exactly the same way, and fixing that destination fixes every printed copy of the code at once.